product catalogue | terminals | screwing technology | sak-series modular terminals | ts 32 | polyamide pa 6.6 | modular feed-through terminals | 16 mm2 - 1 - general ordering data order no. 0271080000 part designation sak 16 bl version feed-through terminal, 16 mm2, screw connection, pa 66, blue, ts 32 ean 4008190097578 qty. 50 pc(s). product notes note, ordering data if qis are aligned side by side, then a tw/ap must be used. note, technical data twin wire end ferrules zh 2.5 - zh 16 can be used. pt okiecex/atex rating data eu-type examination certificate kema97atex1798u download, german kema97atex1798u_d.pdf download english kema97atex1798u_e.pdf iecex certificate of conformity iecexkem06.0014u atex voltage 690 v atex current 66 a atex conductor cross-section 16 mm2 iecex voltage 690 v iecex current 66 a iecex conductor cross-section 16 mm2 voltage when using cross-connections crossconnectionguide.pdf operating temperature range einsatztemperaturbereich siehe eg- baumusterprfbescheinigung/iecex-certificate of conformity marking en 60079-7 ex e ii marking atex directive 94/9/ec ex ii 2 g d additional technical data colour of insulating material blue connection direction on side end plate required yes explosion-tested version "ex e" no installation advice ts 32 insulating material pa 66 levels cross-connected internally no no. of identical terminals 1 no. of levels 1 no. of terminal strips per level 2 open sides right operating temperature range - 50 c, + 100 c type of connection screwed type of mounting snap-on ul 94 flammability rating of insulation material v2 version feed-through terminal
product catalogue | terminals | screwing technology | sak-series modular terminals | ts 32 | polyamide pa 6.6 | modular feed-through terminals | 16 mm2 - 2 - csa rating data voltage (csa) 600 v csa current 87 a min. cross-section (csa) awg 14 max. cross-section (csa) awg 6 conductors for clamping (additional connection) flexible with ferrule, min. (din 46228 pt 1) 4 mm2 flexible with ferrule, max. (din 46228 pt 1) 16 mm2 conductors for clamping (rated connection) clamping range, min. 2.5 mm2 clamping range, max. 16 mm2 type of connection screw connection 2nd type of connection screwed connection direction on side no. of connections 2 stripping length 15 mm clamping screw m 4 blade size 1.0 x 5.5 mm tightening torque range 2.0...4.0 nm gauge to iec 60947-1 b6 solid, min. 2.5 mm2 solid, max. 10 mm2 stranded, min. 4 mm2 stranded, max. 16 mm2 flexible, min. 4 mm2 flexible, max. 16 mm2 flexible with ferrule, min. (din 46228/1) 4 mm2 flexible with ferrule, max. (din 46228/1) 16 mm2 flexible, min., ferrule with plastic collar (din 46228 pt 4) 16 mm2 flexible, max., ferrule with plastic collar (din 46228 pt 4) 16 mm2 twin wire-end ferrule, min. 1.5 mm2 twin wire end ferrule, max. 10 mm2 awg conductor size, min. awg 12 awg conductor size, max. awg 6 awg conductor size, min. 3.31 mm2 awg conductor size, max. 16 mm2 dimensions width 12 mm height of lowest version 57.5 mm length 50 mm ts 32 offset 25 mm rating data rated cross-section 16 mm2 rated voltage 1,000 v rated impulse voltage 8 kv
product catalogue | terminals | screwing technology | sak-series modular terminals | ts 32 | polyamide pa 6.6 | modular feed-through terminals | 16 mm2 - 3 - rating data rated current 76 a standards iec 60947-7-1 current with max. conductor 76 a pollution severity 3 ul rating data voltage (ul) 600 v current (ul) 80 a min. cross-section (ul) awg 12 max. cross-section (ul) awg 4 approvals approvals institutes classifications etim 2.0 ec000897 etim 3.0 ec000897 eclass 4.1 27-14-11-20 eclass 5.0 27-14-11-20 eclass 5.1 27-14-11-20 similar products order no. part designation version 0271060000 sak 16 feed-through terminal, 16 mm2, screw connection, pa 66, beige, ts 32
|
